AirAudit Global Register your interest
Independent compressed air audits & monitoring · US operations opening 2027

Your plant's most expensive utility is leaking money.

We measure your compressed air system end to end, find where the energy goes, and hand you a prioritized action list with the savings and payback for each item. Then Canary keeps watching, so new waste shows up in days instead of at the next audit. We do not sell compressors, so our findings answer to your bottom line only.

ASME EA-4 ISO 11011 certified · TÜV AUSTRIA ISO 8573-1 air quality 13 years · 250+ audits
~10%

of the electricity used by US industry goes to making compressed air.

Source: US DOE, Compressed Air Challenge
20–30%

of the compressed air a typical plant makes can be wasted through leaks alone.

Source: US DOE, Compressed Air Challenge
250+

industrial compressed air audits completed by our team across textile, cement, food, pharma, steel and chemicals.

AirAudit project records, 2013–2026
Your system, end to end

From the compressor room to the tool, every link is measured

AIR FLOW → ≈ 6.5 scfm ≈ 3.2 scfm COMPRESSOR DRYER RECEIVER DISTRIBUTION POINTS OF USE Every segment logged · leaks tagged · losses in scfm
How it works

Measure it once. Then never fly blind again.

A one-time audit tells you what your system is doing today and what to fix. Canary then runs continuously, so you keep the savings instead of watching them quietly return.

1 2 3 ∞ ONE-TIME YOUR TEAM ONE-TIME CONTINUOUS Measure Fix Verify Monitor Canary keeps the loop closed — new waste shows up in days, not at the next audit
Step 01 · one-time

Measure

A week of logged power, flow and pressure on your own system — on-site work performed locally, to US insurance and safety requirements.

Step 02 · your team

Fix

A ranked action list: leak repairs, pressure and control changes, each with its own dollar saving and payback.

Step 03 · one-time

Verify

We return and measure the result against the baseline, so savings are confirmed by meter, not assumed.

ongoing Step 04 · Canary

Monitor

Sensors stay on your compressors and headers. New leaks and drift surface in days, with ESG-ready energy data.

The audit

Measured, not estimated

Every finding in our report traces back to logged data from your own system. A typical audit is one site visit plus a week of continuous logging.

What you leave with

A ranked action list — every measure costed, with its dollar saving and payback in months. Measured first, then verified on site.

  1. 01

    Walk-through and baseline

    We inventory compressors, dryers, receivers and controls, and map the distribution system from the compressor room to the points of use.

    Nameplate kW/hp · control mode · piping layout
  2. 02

    Continuous data logging

    We log power, flow and pressure across normal production, typically for seven days, to capture shifts, weekends and idle periods.

    kW · scfm · psig · load/unload cycles
  3. 03

    Leak survey and tagging

    An ultrasonic survey finds and tags every leak we can reach, each with an estimated loss and a repair priority.

    Tagged leaks · scfm lost · kW wasted
  4. 04

    Demand and quality review

    We look for inappropriate uses, artificial demand from excess pressure, and air quality against what each process needs.

    Pressure profile · ISO 8573-1 class
  5. 05

    Report and action list

    You get the specific energy of your system, the savings for each measure, the cost to implement and the payback, ranked by return.

    kW/100 cfm · $/year · payback months
  6. 06

    Verification to IPMVP

    After your team or contractor completes the repairs, we return and measure the result against the baseline, following IPMVP measurement & verification — so savings are documented, not assumed.

    Before / after kWh · verified $/year · tCO₂e
Standards & rebates

Built on the standards your engineers — and your utility — already trust

ASME EA-4

US assessment standard

The American national standard for energy assessments of compressed air systems. It sets out what a complete assessment must cover and how results are reported.

ISO 11011

International method

The international standard for compressed air energy-efficiency assessment. AirAudit's practice is certified to ISO 11011:2013 by TÜV AUSTRIA — certificate TPAK-080214126-CASA.

ISO 8573-1

Air quality classes

We classify measured air purity for particles, water and oil, so you can see whether treatment matches each process.

Turn the audit into money back

Many US utilities and state programs offer incentives for compressed air efficiency projects. Where your utility runs one, our ASME EA-4 and IPMVP documentation is built to support the rebate claim — so the work can pay for itself twice.

Why independence matters

We do not sell compressors and do not represent compressor companies.

Many compressed air assessments come from companies that sell equipment, and their recommendations often end in a new compressor. Ours usually end in repairs and setting changes that cost little and pay back in months. We earn our fee from the audit, not from what you buy afterward.

Quick estimate

What is your compressed air costing you?

Enter four numbers from your compressor room and power bill. This is a rough guide, not an audit result.

kW
Sum of motor nameplates. 1 hp ≈ 0.746 kW.
h/yr
Two shifts, five days ≈ 4,000. Around the clock ≈ 8,000.
$/kWh
Blended rate including demand charges.
% of full power
If unsure, leave at 70%.
Annual compressed air energy cost
—
Typical recoverable savings (10–25%)
—
—
Energy that could be avoided
—

Savings range reflects what audits commonly find from leak repair, pressure reduction and control changes. On implemented savings, the audit fee is typically recovered within 2–4 months. Your actual figure comes from measurement.

Register your interest
Where the money sits
Base load you'll keep using Upside, to 25% Recoverable floor, 10%
Annual air energy cost—
Typically recoverable (10–25%)—
Continuous monitoring

An audit is a snapshot. Canary is the live feed.

Canary Air Intelligence

Leaks come back. Pressure creeps up. A compressor starts short-cycling on a shift nobody was watching. Canary keeps sensors on your compressors and headers and reports energy, flow and pressure continuously, so drift and new waste show up in days — not at the next audit, two years from now.

  • Live specific energy (kW/100 cfm) and leak-load tracking
  • Alerts when consumption departs from your verified baseline
  • Scope 2 energy data, export-ready for your ESG and sustainability reporting
  • One dashboard across every monitored plant
Visit canary-air.com →
Your data, handled properly

Your energy data is encrypted in transit and at rest, kept in-region, and visible only to your team and ours. We never sell it or share it. Sensors read your system; they are isolated from your production network and controls.

Canary Air Intelligence: Detect, analyze, fix. A live dashboard flags a pressure drop on Line 4 in a compressor room.
Illustrative Canary dashboard view
Imtiaz Ali Rastgar, founder of AirAudit
Imtiaz Ali Rastgar · Founder
Who we are

Five decades on the factory floor

AirAudit was founded by Imtiaz Ali Rastgar, an industrialist and metallurgy specialist whose career in manufacturing spans more than fifty years. He has built and run foundries and engineering companies, served on advisory boards for universities and national research bodies, and written three books on industry and enterprise.

Since 2013 the AirAudit team has audited more than 250 industrial plants, from textile mills and cement works to food, pharmaceutical and steel plants. That is where the method and the benchmark data come from. AirAudit Global brings both to US manufacturers — delivered on the ground to US standards.

PakistanBangladeshMiddle EastUnited States · opening
Track record
2013 250+ 2013–2026 2027 First audits · Pakistan plants audited · 6 sectors US operations open
Register your interest

We're opening US operations in 2027

AirAudit is establishing its US practice now, with our first US projects planned for 2027. Register your interest and a named member of our team replies personally within two working days to set up a call. Share a few details and our engineers review them from the start — so even an early inquiry gets a useful answer.

info@airauditglobal.com
Athar Amir Manager Marketing +92 334 5933391
kW / hp

We reply within two working days. No audit is scheduled until US operations open in 2027.

Newsletter

Stay in the loop

Occasional updates on compressed air energy savings and our US launch. Unsubscribe any time.

Please correct the marked field(s) below.
SKY NEWSLETTER